Filter
Top Products
Using Scanner Diagnostics 6-3
Setting the Scanner Mode
To set the scanner mode without using the Scanner Configuration menu:
1. Tap the printer icon in the System Tray.
2. Set the Scanner Mode: Momentary, Continuous, or Compatible.
Momentary
The scanner is on as long as the trigger is pressed
and goes off when the trigger is released.
Continuous
The scanner is always on. A good scan causes the
scanner to reset and continue scanning.
Compatible
The scanner operates in Monarch® 6037
compatible mode. The scanner is on as long as the
trigger is pressed and goes off after a successful
scan or a predetermined timeout period.
Note: A bad scan turns off the scanner and activates the tone (.wav
file) set in Scanner Configuration.
Setting the Trigger Mode
To set the trigger mode without using Scanner Configuration:
1. Tap the printer icon in the System Tray.
2. Set the Trigger Mode: Scan, Drop, or Forward. The default is
Forward.
Scan
Pressing the trigger activates the scanner.
Drop
The printer ignores the trigger press and does NOT
activate the scanner.
Forward
The printer passes the trigger press to the application,
which simulates pressing F11.