Filter
Top Products
5-12 System Administrator’s Guide
Configuring I 2of5 Bar Codes
1. To configure I 2of5 settings, tap I 2of5 from
the Scanner Configuration screen.
2. Enable each bar code you need to scan.
I 2of5
Allows the scanner to scan I 2of5
bar codes.
Transmit
CD
Tells the scanner to return the
check digit with the data when an
I 2of5 bar code is scanned.
Convert
to
EAN13
Tells the scanner to convert 14-
character I 2of5 bar codes into an
EAN13 bar code.
For the conversion to work, the following must occur:
♦ I 2of5 bar codes must be enabled.
♦ 14 must be a valid length.
♦ The data must have a leading zero.
♦ The data must include an EAN13 check digit.
Verify
CD
Tells the scanner to check the integrity of a scanned I 2of5
bar code to ensure it complies with either USS or OPCC
standards.
Lengths
Sets the
length(s)
for I2 of
5 bar
codes.
Variable, specifies that I 2of5 bar codes can be any length.
Note: Specifying a range of lengths increases the likelihood
of unsuccessful scans.
1 Fixed, specifies a single length for valid I 2of5 bar codes.
The range for Length 1 is 2 – 99. The default is 14.
2 Fixed, specifies two lengths for valid I 2of5 bar codes.
The range for Length 2 is 2 – 99. The default is 0.
3. Tap OK to save all the settings and return to the Scanner
Configuration screen.