Pelco C2907M-D Network Card User Manual


 
12 C2907M-D (4/05)
Typical Applications
There are two ways to make a high performance multimedia transmission system for computer networks:
One way is to use just the transmitter and connect it through the computer network to a PC with a web browser at the receiving end.
Another way is to connect the transmitter through the computer network to a receiver. This is often called a box-to-box connection because
it uses two PelcoNet NET350 transmission system units.
In either case, routing dedicated cables from a camera to a monitor is not required because you can use the existing computer network for that
purpose.
Refer to figures 3 through 16 for examples of these configurations. Refer to
Appendix A
for detailed connection illustrations.
-
Figure 3.
Configuration for Box-To-Box Connections
VideoOut
75
AudioI/O
Power
VideoIn
75
AudioI/O
Power
TCP/IP
INTRANET/INTERNET
LAN/WAN
TRANSMITTER
RECEIVER
COM2:
RS232
COM1:
RS232/422/485
COM2:
RS232
COM1:
RS232/422/485