Filter
Top Products
C2907M-D (4/05) 51
TYPICAL SESSION
The terminal program main menu appears in the terminal window as shown below.
’v’ video
’i’ IP
’r’ RCP+
’?’ this menu
’q’ exit/logout
NOTE: You cannot use backspace during a terminal sessionif you mistype a character, end your entry by pressing Enter and try again. If you see
duplicate characters on any entry, the “local echo” feature of your PC’s terminal program is not disabled.
If you are using the terminal to set up the unit’s IP address, just type i and then i again. You are prompted to enter a new IP address. Do so and
press Enter.
If you want to establish a live video connection to a remote unit, you have to specify the remote IP address by typing r and then entering the
remote IP address.
To establish a connection, go to the main menu, then type r, then type e, and then select either video 1 or video 2. To disconnect, type 2 in the
same menu.