Filter
Top Products
58 C2907M-D (4/05)
MATRIX LIVE VIDEO/SERVER PUSH PAGE CONTENTS
Figure 43. Matrix Control Page (Live Video Page Shown)
The Matrix Control pages contain the following:
• Live video indicators (live video page only)
•Ten numbered buttons
• CAM (camera) button to select a camera
• MON (monitor) button to select a monitor
• CLR (clear) button to cancel an entered number
• PRST (preset) button to select a preset
•PATT (pattern) button to select a pattern
• MAC (macro) button to select a group camera sequence (not supported for the CM6700)
• STOP button to halt a function
• BWD (backward) button to scroll through the cameras in reverse order
• FWD (forward) button to scroll through the cameras in forward order
• AUX ON button to activate an auxiliary
• AUX OFF button to deactivate an auxiliary
• ACK button to close a message when progamming a pattern on the CM6700 only
• SET check box to use in progamming presets and patterns
The following are arrayed under “Lens”:
• Iris open and close buttons
• Focus far and near buttons
• Zoom out and in buttons
The following are arrayed under “Pan/Tilt”:
• Eight direction arrow buttons
• Home button in the center to return the camera to its home position (preset 1)
“In Control” or “No Control” indicates whether you have control of the camera. Note that PTZ functions are temporarily disabled while recording
live video. Recording control buttons are beneath the picture (live video page only).
On the Matrix live video control page, you can control the following:
• Monitor: To select a monitor, enter the monitor number and then click MON.
• Camera: To select a camera, enter the camera number (1-16) and then click CAM.