Filter
Top Products
C2907M-D (4/05) 57
USING THE AUDIO TRANSMISSION FEATURE OF A LIVE VIDEO PAGE
To transmit audio via microphone from your PC to the NET350T, do the following:
1. Connect a microphone that is compatible with your PC to your PC’s “mic” input.
2. Connect a speaker to the NET350T’s Audio I/O port.
3. While viewing live video, press the F12 key on the PC to send audio to the NET350T. Note that while holding down the F12 key, audio from
the NET350T will not be heard (half duplex).
WEB BROWSER CONTROL PAGES
These pages let you control certain Pelco equipment at your computer through a NET350 transmitter (not through a NET350 receiver).
1. To access the PelcoNet NET350 transmission system home page, you must first connect to the Internet/intranet network and open Internet
Explorer (the browser).
2. Then, enter the default address (10.0.0.1 for transmitters or 10.0.0.2 for receivers) in the address box. If this address has been changed,
enter the application address. The home page appears.
3. Click Control to access the Device Controls page.
4. The Device Controls page has underlined links to the control pages. To access, click one.
Figure 42. Device Controls Page
The live video control pages include representations of keys that let you control various functions (in addition to showing the camera display).
Use the mouse pointer and click the left mouse button to enable options and operate controls on the screen. Click outside the options to disable
a radio button or selection button.
Live video pages let you choose the size of the video viewing area. Click either 352x288 (small) or 704x576 (large) in the Resize Video field.
Live video pages also let you record and play back camera views on a PC’s hard drive. Refer to the Recording and Viewing the Display on a PC and
the NET350 section for details.
Server push page displays are similar to live video page displays except the server push page lacks the live page indicators at the top of the page
and the recording buttons below the picture.