Filter
Top Products
52 C2907M-D (4/05)
TERMINAL PROGRAM TRANSMITTER MENU STRUCTURE
The following describes the terminal program transmitter menu structure. The menu items and commands are enclosed in single quotation
marks. Do not enter the quotation marks. Information and current settings are displayed to the right of the commands. Refer to the Command
Reference section for descriptions of the commands.
Main Menu
’v’ video
’i’ IP
’r’ RCP+
’m’ misc
’?’ this menu
’q’ exit/logout
v – Video Menu
’e’ encoder settings
’a’ adapt std res (e.g., CIF) to NTSC: 1
’x’ leave this menu
’?’ this menu
e – Encoder Submenu
’e’ select encoder: 1
’>’ start encoder: 1
’|’ stop encoder
’p’ parameter set: 1
’n’ parameter set name: high quality (CIF)
’k’ min frame dist [1]: 1
’r’ encoder bitrate [kBit]: 5000
’Q’ I quantizer: 8
’q’ P quantizer: 8
’i’ I frame distance: 0
’u’ I update distance: 250
’s’ frame size (res): 3
’w’ custom width: 432
’h’ custom height: 288
’d’ reset to default
’x’ leave this menu
’?’ this menu
a – Adapt Standard Resolutions submenu
Adapt standard resolutions (e.g., CIF) to NTSC? 0 = no, 1 = yes
i – IP Menu
An asterisk (*) means a reset of the NET350 after a change is necessary. Reboot by cycling the power.
’i’ local IP (*): 172.16.0.96
’s’ local subnet mask (*): 255.255.0.0
’g’ local gateway (*): 0.0.0.0
’r’ remote IP: 172.16.0.99
Mac address: 00-07-5f-30-00-3c
’a’ auto connect (off)
’p’ ping remote IP (off)
’x’ leave this menu
’?’ this menu