Filter
Top Products
62 C1522M-C (2/05)
Figure 46. CM6800 DIP Switches – Factory Default Settings
Table G. CM6800 DIP Switch Settings
CM6800 DIP Switch Default Settings
Switch 1 OFF (0) = NTSC CM6800-32X6: OFF
ON (1) = PAL CM6800-32X6-X: ON
Switch 2 RESERVED – must be in the OFF position for proper operation OFF
Switch 3 RESERVED – must be in the OFF position for proper operation OFF
Switch 4 RESERVED – must be in the ON position for proper operation ON
Switch 5 RESERVED – must be in the OFF position for proper operation OFF
Switch 6 RESERVED – must be in the OFF position for proper operation OFF
Switch 7 USED TO RESET SOFTWARE. REFER TO THE SOFTWARE OFF
RESET SECTION
CAUTION: Resetting the software restores the system software to original
settings, programmed by Pelco. All user programming is lost.
Switch 8 RESERVED – must be in the OFF position for proper operation OFF
APPENDIX
CM6800 DIP SWITCHES