Filter
Top Products
48 C1522M-C (2/05)
MONITOR DISPLAY
Use the Monitor screen to adjust monitor display settings for your system. You can adjust settings for the current monitor only (CURRENT)
or for all system monitors (ALL).
Figure 39. Access the Monitor Screen
MONITOR: Select CURRENT to program the monitor display for the monitor you are currently operating or ALL for all
monitors connected to the CM6800.
If you select ALL, you must navigate left or right in the SET ALL field to apply programming changes (refer to the
SET ALL field description).
CAMERA NUMBER: Enable (ON) or disable (OFF) on-screen display of the logical
camera number.
CAMERA TITLE: Enable (ON) or disable (OFF) on-screen display of the camera
title (maximum of 20 alphanumeric characters).
R/X TYPE: Enable (ON) or disable (OFF) on-screen display of the camera
control type. The letter displayed on the monitor reflects the
receiver control type selected in the CONTROL field on the
Camera screen.
R/X TYPE DISPLAY VALUES:
E = Coaxitron extended mode (32-bit)
S = Coaxitron standard mode (15-bit)
M = Genex multiplexer
P = PTZ-P (RS-422 through Control Port PTZ-A)
D = PTZ-D (RS-422 through Control Port PTZ-A)
MON/ALM NUMBER: Enable (ON) or disable (OFF) on-screen display of the monitor/
alarm number. During normal operation, the monitor number
appears in this field. The monitor number is a fixed number,
representing an actual BNC output on the rear panel of the
CM6800. When an alarm is active, the alarm number appears in
this field. The alarm number is either the physical alarm input
number of an internal alarm contact, or the address of an
external alarm contact as configured on the Alarm Interface Unit.
PELCO SWITCHER
MODEL CM6800
MAIN MENU
1 CAMERA
2 LOGICAL CAMERA
3 MONITOR
4 ACCESS
5 TIME & DATE
6 PORT
7 PRIORITY
8 SEQUENCE
9 MACRO
10 ALARM CONTACTS
11 EVENT TIMER
12 SET AUXILIARY
13 SET PASSWORD
14 ABOUT CM6800
ENGLISH
RETURN
00654
MONITOR CURRENT
CAMERA NUMBER: ON
CAMERA TITLE: ON
R/X TYPE: ON
MON/ALM NUMBER: ON
MON/ALM STATUS: ON
TIME: ON
DATE: ON
BRIGHTNESS 8
POSITION DISPLAY
SET ALL
RETURN
00655
0001 E CAM 1
0001 01-JAN-01 01:01:01
0001 E CAM 1
0001 01-JAN-01 01:01:01
0001 E CAM 1
0001 01-JAN-01 01:01:01
0001 E CAM 1
0001 01-JAN-01 01:01:01