Filter
Top Products
70 C1528M-F (6/05)
CREATE AND RUN A PATTERN
Patterns are not available with the KBD100 keyboard.
KBD960/KBR960 KEYBOARDS
Refer to the KBD960 Keyboard Installation/Operation manual for
instructions on creating a pattern.
1. Select
PRST
to display the Preset Menu.
2. Select to start a pattern.
OR
1. Select
PRST
to display the Preset Menu.
2. Enter 1.
3. Select
to run the first pattern of previously defined half-
patterns.
OR
1. Select
PRST
to display the Preset Menu.
2. Enter 2.
3. Select to run the second pattern of previously defined
half-patterns.
KBD200A/300A KEYBOARDS
Create a Long Pattern
1. Enter a camera number.
2. Enter 0.
3. Press and hold the PATTERN key for two seconds.
4. The monitor will indicate the programming function is active.
Move the camera position as desired for the pattern.
5. Press the ACK key to close the programming function.
Create a Short Pattern
1. Enter a camera number.
2. Enter the short pattern number (1 or 2).
3. Press and hold the PATTERN key for two seconds.
4. The monitor will indicate the programming function is active.
Move the camera position as desired for the pattern.
5. Press the ACK key to close the programming function.
Run a Long Pattern
1. Press the PATTERN key.
2. Move the joystick or call a preset to stop the pattern.
Run a Short Pattern
1. Enter the short pattern number (1 or 2).
2. Press the PATTERN key.
3. Move the joystick or call a preset to stop the pattern.