Filter
Top Products
111
PerleVIEW Updates
PerleVIEW Updates
Menu Selection: PerleVIEW Updates
Required Authorization: PerleVIEW Administrator
PerleVIEW can be set to automatically check for firmware updates to itself. PerleVIEW can either
notify the administrator that updates are available or automatically download the updates to the
PerleVIEW server. After the software has been downloaded from the Internet, you can then update
PerleVIEW by using the PerleVIEW Admin Utility. See
PVAdmin (PerleVIEW Administrator) for
more information.
Launching PerleVIEW Updates
Administration->PerleVIEW Updates
Working with PerleVIEW Updates
PerleVIEW Updates allows you to configure or view the following items;
z Set the frequency to check for software updates to PerleVIEW
z Select action to take when a software update is available
z Manually initiate a check to look for a software update
Check the
Internet for
updates
Action
PerleVIEW Updates
This parameter defines how often PerleVIEW will check whether an update
is available. By default, PerleVIEW will check for software updates every 7
days.
Valid options are 1 - 999 days.
This parameter defines what action PerleVIEW will take if an update to the
PerleVIEW software is found. By default, PerleVIEW will notify the
administrator of any new software updates by updating the status in the
notification bar. See Guided Tour of the PerleVIEW User Interface for
more information on the notification bar. PerleVIEW can be configured to
also automatically download updates to the PerleVIEW server. To apply
these updates to PerleVIEW see PVAdmin (PerleVIEW Administrator) .