Filter
Top Products
67
Groups Views
Limited Functionality
Devices that show up under the “Limited Functionality” grouping are devices that meet one of the
following criteria;
Unsupported firmware
These devices are running firmware which is the pre v1.5 which is required in order to be fully
supported by PerleVIEW. These devices need to be upgraded to the latest version of software
available.
You can have PerleVIEW automatically retrieve the latest device firmware by enabling the “Check
for Firmware Updates” feature. See
Check for Firmware Update . Alternatively, you can download
the latest firmware from the Perle Web site at http://www.perle.com/downloads/
Once you have obtained the latest firmware, you must now deploy it to the device. See Deploying
Firmware .
Factory Default
These devices have never been configured. They contain the default IP address of 10.0.0.10. Before
PerleVIEW can access these devices, you must assign a valid IP address to them. For more
information see
Device -> Not Configured .
This grouping may or may not show up on the left hand navigation panel. It only appears if there are
devices that meet the criteria for this group.
To view Limited Functionality devices select Devices -> Limited Functionality from the left
navigation panel.
Limited Functionality