Perle Systems 5500320-12 Network Card User Manual


 
PerleVIEW V1.0 135
Event Information Appendix B
B
PerleVIEW Generated Events
Event Severity Health Status Message
Critical Critical Device {0} at IP address {1} is not reachable.
Critical Critical Device {0} at IP address {1} firmware version {2} does
not fully support $(SWProductName) functions. Please
upgrade your Device firmware to the latest version.
Critical Critical New Perle factory default device {0} at IP address {1} has
been discovered. Please assign a proper IP address to this
device.
Critical Critical Existing device {0} at IP address {1} has been set to
factory default. Please assign a proper IP address to this
device.
Critical Critical Duplicate IP address has been detected on device {0} at IP
address {1}. Device monitoring will be suspended.
Critical Critical Duplicate IP address has been resolved on device {0} at IP
address {1}. Suspend state will be automatically reset for
this device.
Critical Critical Device {0} at IP address {1} aggregate health status is
now Critical. Device health status was previously {2}.
Critical Critical Device {0} at IP address {1} not accessible via SNMP.
This may be do to either incorrect device SNMP
credentials settings or the device/network not supporting
SNMP.
Critical Critical Device {0} at IP address {1} not accessible via SNMP.
This may be do to either incorrect device SNMP credential
settings or the device/network not supporting SNMP
protocol.
Critical Critical Polling for hardware inventory for the device {0} at IP
address {1} failed to complete. This may be do to network
or database timeout errors. Please run rediscovery on this
device to retry this function.
Major Major Administrator login credential failed for device {0} at IP
address {1}. Please run rediscovery on this device to
automatically rediscover a valid credentials for this device.
Major Major Device {0} at IP address {1} aggregate health status is
now Major. Device health status was previously {2}.