Filter
Top Products
94
Automatic Event Handling
After completing the fields, you can click on the Test button to test the connection to the E-Mail
server. PerleVIEW will send a test message of “PerleVIEW event action handler test E-mail
message”. If the test E-Mail is received at the destination, the test is successful. If not successful, then
correct the parameters in error and retry the test.
If you do not wish to add any other actions to this event, then click on the Apply button to save the
task instance.
Send SMS Text Message (via E-mail)
Subject Type in a message for the subject that is meaningful to you.
By default, PerleVIEW uses internal macros to configure the subject
message as:
Event on ${DeviceName} at IP address ${DeviceIPAddress}
Where ${DeviceName} is the actual Device Name or the Preferred Name if
configured.
${DeviceIPAddress} is the IP address of the device.
Body Type in a body message that is meaningful to you.
By default, PerleVIEW uses internal macros to configure the body message
as:
Event occurred on ${DeviceName} at IP address ${DeviceIPAddress}.
${EventMessage}
Where ${DeviceName} is the actual Device Name or the Preferred Name if
configured.
${DeviceIPAddress} is the IP address of the device.
${EventMessage} is the text of a PerleVIEW generated message, see
Appendix B, "Event Information" or a Device generated message (see your
MCR-MGT users guide for Device messages).
Send SMS Text
Message
(via E-mail)
Phone
number
Configure the cellular phone number where the SMS message will be sent.
For example: 9054770000