Filter
Top Products
97
Automatic Event Handling
After completing the fields, click on the Test button to have PerleVIEW send a test trap to the trap
receiver. PerleVIEW will send a test message of “Trap being sent indicates that a PerleVIEW user
has issued a test trap in order to verify his event handler trap configuration”. If the trap is received by
the trap receiver, the test is successful. If not successful, then correct the parameters in error and retry
the test.
If you do not wish to add any other actions to this event, then click on the Apply button to save the
task instance.
Acknowledge Event
Acknowledge
Event
Global Settings
See Event Filter Settings for more information on Event Filters.
See E-mail Account Settings for more information on E-mail account settings.
See Twitter Users for more information on Twitter Users settings.
See Internet Proxy Server for more information on Internet Proxy Server settings.
To view SNMP traps on the Trap Receiver, you must load both the MCR-MGT Management
Module MIB and the PerleVIEW MIB into the Trap Receiver (both these MIBs can be found on the
Perle Web site
http://www.perle.com/downloads/
For some events, you may want to automatically have PerleVIEW mark
them as acknowledged. Marking an event as “Acknowledged” simply
indicates to you that you have dealt with this event. It is used to help you sort
which events need your immediate attention and which ones have already
been dealt with.