Filter
Top Products
58
Groups Views
The information in this table is collected from the PerleVIEW database. When the table is being
displayed, the information is updated every minute. Not all columns are applicable to all hardware. If
not applicable, the entry will be left blank. For information on Rediscover this device see
Rediscover
devices.
Health Details This is the current health status of this device. To see more information on
device generated messages (see your MCR-MGT users guide for Device
messages).
User Access
Level
This is the device access level for this device for the current user logged into
PerleVIEW. Valid user access levels are Device View, Device Admin and
Device Operator. For more information on user access levels see PerleVIEW
User Accounts .
Address This is what PerleVIEW will use when communicating with the device. It
can be the hostname, IPV4 address or IPV6 address of the device.
IPV4
address/subnet
This is the current IPV4 address of this device and its subnet. (only available
if configured/used on the device).
IPV6 Addresses This is the current IPV6 address of this device. (only available if
configure/used on the device).
Mac Address This is the Mac Address associated with this device.
Description This is a description retrieved from the device.
Location This is the SNMP location information retrieved from the device.
Contact This is the SNMP contact name retrieved from the device.
Uptime How long this device has been powered on.
Management
protocols
These are the management protocols configured on your target device. These
management protocols will be used by PerleVIEW to communicate with
your target device. If a protocol is not accessible, it will be marked with a
red “X”. One reason why a protocol may not be accessible is a firewall
which is preventing access.