Filter
Top Products
103
Serial Port Profiles
Phone Number to Host Mapping
If your modem application dials using a phone number, you can add an entry in the Phone Number to
Host Mapping window that can be accessed by all serial ports configured as Virtual Modem. You
need to enter the phone number sent by your modem application and the IOLAN IP address and TCP
Port that will be receiving the ’call.’ The DS1 supports up to 4 entries and the TS2 supports up to 8
entries.
The following buttons are available:
Add Button
Edit Button
Delete Button
VModem Phone Number Entry
Create an entry in the Phone Number to Host Mapping window.
Configure the following parameters:
Click the Add button to display a window that allows you to configure the
phone number or AT command your modem application sends and the
IOLAN’s IP address and TCP port number that is receiving the call.
Click on a phone number entry and click the Edit button to change any values
configured for the phone number.
Click on a phone number entry and click the Delete button to remove it from
the phone number list.