Filter
Top Products
Prepare
25
ENGLISH
4.2 Remote control
The set is supplied with a 2-way remote control and a 1-way remote control.You can use these to
control functions on or .
Note
Use the 1-way remote control for Station management, Network configuration, and to Edit track
information.The 2-way remote control cannot be used for these tasks.
4.2.1 Remote control battery installation
Caution!
To avoid the risk of explosion:
• Do not puncture, cut, or manipulate batteries in any way and do not throw them into the fire.
• Do not short-circuit the battery terminals.
To avoid burn injuries:
• Wear protective gloves when you handle leaking batteries.
To avoid leakage of corrosive battery fluid and damage to the product:
• Always replace all batteries at the same time
• Do not mix old and new batteries or batteries of different types.
• Replace batteries immediately if they are exhausted.
• Always remove the batteries, if the remote control will not be used for a longer period of
time.
To avoid batteries being accidentally swallowed:
• Always keep them out of reach of children and pets. (Consult a physician immediately, if a
battery has been swallowed!)
Important!
• Always point the remote control directly towards the IR sensor on or you wish to
operate.
• First, select the source you wish to control by pressing one of the source select keys on the
remote control (for example CD/MP3-CD, HD, FM TUNER,AUX).
• Then select the desired function (for example 2/; / J( / )K ).