Filter
Top Products
• On a Station that was already paired with another Center:
a Press MENU
b Select Installation mode
> Station enters automatic installation mode.
2 Disconnect the power plug of and then connect it to the power supply again.
> Display: Connecting to Center
3 On remote control, press MENU to enter Installation Mode.
> The following messages are shown in succession:
Center found
Connecting to Center...
On :
4 Press STOP 9 when all the are found.
> HD screen appears once is connected to .
11.1.1 Delete a Station ( )
1 Check that is in HD source.
2 Press MENU to enter the menu screen.
3 Use 3 or 4 and 2 to enter Station Management (Mgnt) menu.
4 Press 3 or 4 and 2 to select Delete Station.
> The list of connected will be displayed on .
5 Use 3 or 4 and 2 to select you wish to delete.
6 Press 3 or 4 and 2 to select YES.
Network settings
67
ENGLISH