Filter
Top Products
Prepare
27
ENGLISH
4.2.2 Remote control,2-way
You can choose to use the 2-way remote control to operate either or . Depending on the
level of interference, you can also select your preferred operational mode:Enhanced Mode or
Normal Mode.
Center (default): to operate
Station: to operate
Enhanced Mode (default):This mode offers a better range (distance and angle). Use this mode if
there is no interference from a plasma TV nearby.
Normal Mode: Choose this mode if there is interference from a plasma TV nearby that is
distorting the display of the 2-way remote control.
1 Press & hold REFRESH until the Select Device screen appears in the display of the 2-way
remote control.
2 Use 3 or 4 to highlight and 2 to select Center or Station.
3 Use 3 or 4 to highlight and 2 to select Normal Mode or Enhanced Mode.
4 Confirm with OK.
Tip
• Avoid placing or near a plasma TV.The interference may distort the display on your 2-
way remote control.
• The status of or is synchronized into the display of the 2-way remote control, so it is
easier to operate the remote control.
• To synchronize the remote control display after activating the y button on the set, press
REFRESH on the remote control of Center.
Important! To save battery power,if no buttons are pressed for approx. 15 seconds, the 2-way
remote control enters idle mode. Press any button to reengage the control.