Filter
Top Products
11.2 Connect to Wi-Fi (wireless) enabled home network
The Wi-Fi enable network is a Wi-Fi infrastructure network or a Wi-Fi enable home network with
a router.
1 To connect or to a Wi-Fi enabled home network, start the Add Network procedure
on or respectively.
2 For music playback within the home network, see 9.3 UPnP Playback.
11.2.1 Network settings on Center ( )
Note
For WEP(Wired Equivalent Privacy) / WPA (Wi-Fi Protected Access) key setting to secure your
network,always refer to the user manual of the Router.WPA is the newest and strongest
encryption method.If this is not available (generally for older devices) choose WEP.
On , search for networks:
1 Press MENU to enter the menu screen.
2 Use 3 or 4 and 2 to enter Settings followed by Network, then Wireless.
> Display: Searching for Networks…
List of networks appears.(Network Not Found appears if no network is found.)
3 Select the Wi-Fi network where your desired UPnP device is located.
4 Press 2 to continue.
5
6 In screen Set IP Mode,select Automatic
If you already know the WEP/WPA
key for the Wi-Fi network:
Use the 1-way remote control
to enter the WEP or WPA key.
Press OK to
confirm.
If there is no WEP/WPA key for the
Wi-Fi network:
Press OK to skip.
Important! Connections that include a Wi-Fi router require that the router is switched on at
all times.
Network settings
68