Philips WAS7500 Printer Accessories User Manual


 
11 Network settings
Note
Use the 1-way remote control for Station management and Network configuration.The 2-way
remote control cannot be used for these tasks.
You can add and/or to your existing home network. Set your network according to your
needs as follows:
11.1 Add Stations to Wi-Fi network of Center ( )
You can connect up to five to .When adding a to the Wi-Fi network of , you can
play the music library of on , or move music playback between and (see 6 HD).
On :
1 Check that is in HD source.
2 Press MENU to enter the menu screen.
3 Use 3 or 4 and 2 to enter Station Management (Mgnt) menu.
4 Use 3 or 4 and 2 to select Add New Station.
> You will enter Installation Mode.Search for the new station starts.
Playback stops on the previously associated if you are playing the HD source.
Tip
If five are already connected, the option Add New Station is not available.In this case, please
delete another first and then add the new .
On :
1 To enter Installation Mode
On a new Station that is still unassociated with the Center:
a Power up new Station.
b Select language.
> Station enters automatic installation mode.
Network settings
66
Type What you want Go to
Simple network settings Add another to Section 11.1
Connect to your PC for configuration management Section 12
Connect to internet for Gracenote® internet service Section 13
Advanced network
settings
Connect to Wi-Fi home network Section 11.2
Connect to wired home network Section 11.3
Expert network setting Connect to two different networks Section 11.4