Filter
Top Products
Adjusting the LCD panel angle
p This function is available for AVIC-Z120BT
only.
WARNING
When opening, closing and adjusting the angle
of the LCD panel, be careful not to get your fin-
gers caught.
CAUTION
Do not open or close the LCD panel by force. This
may cause malfunction.
1 Press the h button.
The “Monitor Setup” screen appears.
2 Touch
or to adjust the angle.
3 Touch .
p The adjusted angle of the LCD panel will be
memorized and the LCD panel will automa-
tically return to that angle the next time the
LCD panel is opened or closed.
Inserting and ejecting a disc
Inserting a disc (for AVIC-Z120BT)
p This section describes operations for AVIC-
Z120BT.
WARNING
! When opening, closing and adjusting the
angle of the LCD panel, be careful not to get
your fingers caught.
! Do not use with the LCD panel left open. If
LCD panel is left open, it may result in injury
in the event of an accident.
CAUTION
! Do not open or close the LCD panel by force.
This may cause malfunction.
! Do not operate this navigation system until
the LCD panel completely opens or closes. If
this navigation system is operated while the
LCD panel is opening or closing, the LCD
panel may stop at that angle for safety.
! Do not place a glass or a can on the open
LCD panel. Doing so may break this naviga-
tion system.
! Do not insert anything other than a disc into
the disc loading slot.
1 Press the h button.
The “Monitor Setup” screen appears.
2 Touch [Open].
The LCD panel opens, and the disc loading
slot appears.
3 Insert a disc into the disc loading slot.
The disc is loaded, and the LCD panel closes.
En
14
Chapter
02
Basic operation