Filter
Top Products
Using the touch panel keys
64
3
2
1
5
1 Sends a 1 key to 6 key command
The external unit can be operated by transmit-
ting the operating commands set to 1 key
through 6 key.
p Operation varies depending on the ex-
ternal unit connected. (In some cases,
some functions may not be used until
you touch and hold the key.)
2 Sends a command [a], [b], [c],or[d]
Touchto operate the external unit.
p Operation varies depending on the ex-
ternal unit connected. (In some cases,
some functions may not be used until
you touch and hold the key.)
3 Switches between automatic andmanual
function
You can turn automatic and manual function
on or off.
You can switch between Auto and Manual
functions of the external unit connected.
Initially, this function is set to Auto.
p Operating commands set for Auto and
Manual operations vary depending on
the external unit connected.
4 Uses F1 through F4 to operate the external
unit
The external unit can be operated by transmit-
ting the operating commands set to F1
through F4.
p The operating commands set to F1
through F4 vary depending on the exter-
nal unit.
p Some functions may not be used until
you touch and hold the key.
5 Sends a band command
Touchto send a band command to the exter-
nal unit.
p Operation varies depending on the ex-
ternal unit connected. (In some cases,
the external unit may not respond.)
6 Recalls equalizer curves
= For details, refer to Using the equalizer
on page 172.
En
147
Chapter
30
Using the external unit (EXT1, EXT2)
Using the external unit (EXT1, EXT2)