Pioneer AVIC-Z120BT Computer Drive User Manual


 
Specifications
General
Rated powersource ...............14.4VDC
(allowable voltagerange:
10.8Vto 15.1VDC)
Grounding system...................Negative type
Maximum currentconsumption
...........................................10.0A
Dimensions (W× H ×D):
AVIC-Z120BT
Chassis .....................178mm× 100mm ×
165mm
(7in.× 3-7/8in.×6-1/2in.)
Nose...........................170mm ×96mm ×17mm
(6-3/4in.× 3-3/4in.×
5/8in.)
AVIC-X920BT
Chassis .....................178mm× 100mm ×
165mm
(7in.× 3-7/8in.×6-1/2in.)
Nose...........................170mm ×96mm ×11mm
(6-3/4in.× 3-3/4in.×
3/8in.)
Weight:
AVIC-Z120BT ....................2.43kg(5.3lbs)
AVIC-X920BT ....................2.01kg (4.4lbs)
NAND flashmemory .............4GB
Navigation
GPS Receiver:
System ................................L1, C/Acode GPS
SPS (StandardPositioning
Service)
Reception system ..........32-channelmulti-channel
reception system
Reception frequency....1575.42MHz
Sensitivity ..........................140dBm (typ)
Position updatefrequency
...........................................Approx. onceper second
GPS antenna:
Antenna .............................Micro stripflat antenna/
right-handed helicalpolari-
zation
Antenna cable.................3.55m(11ft. 7in.)
Dimensions (W× H ×D)
...........................................33mm× 15mm× 36mm
(1-1/4in.× 5/8in.×
1-3/8in.)
Weight ................................73.7g(0.16lbs)
Display
Screen size/aspectratio:
AVIC-Z120BT ....................7 inchwide/16:9
AVIC-X920BT ....................6.1inch wide/16:9
Effective displayarea:
AVIC-Z120BT ....................159mm× 84mm
AVIC-X920BT ....................138mm × 73mm
Pixels ............................................. 384000 (800 ×480)
Display method ........................TFTActive matrixdriving
Backlight .....................................LED
Color system ..............................NTSC compatible
Tolerable temperaturerange:
Power on............................+14°F to+140°F
Power off............................4°Fto +176°F
Angle adjustment
AVIC-Z120BT ....................0° to22°
AVIC-X920BT ....................
Audio
Maximum poweroutput .......50W × 4
50W× 2ch/4W +70W×
1ch/2W (for subwoofer)
Continuous power output ...22W × 4(50Hz to15kHz,
5%THD,4W LOAD,Both
Channels Driven)
Load impedance ......................4W (4Wto 8W[2Wfor 1ch]
allowable)
Preoutoutput level (max):
AVIC-Z120BT ....................4.0V
AVIC-X920BT ....................2.2V
Preoutimpedance:
AVIC-Z120BT ....................100ohm
AVIC-X920BT ....................1kohm
Equalizer (7-Band GraphicEqualizer):
Frequency ..........................50Hz/125Hz/315Hz/800Hz/
2kHz/5kHz /12.5kHz
Gain ......................................±12dB
Loudness contour:
Low .......................................+3.5dB (100Hz), +3dB
(10kHz)
Mid .......................................+10dB(100Hz), +6.5dB
(10kHz)
High .....................................+11dB (100Hz),+11dB
(10kHz)
(volume: 30dB)
HPF:
Frequency ..........................50Hz/63Hz/80Hz/100Hz/
125Hz
Slope....................................12dB/oct
Subwoofer:
Frequency ..........................50Hz/63Hz/80Hz/100Hz/
125Hz
Slope....................................18dB/oct
Gain ......................................24/+6dB
Phase ..................................Normal/Reverse
Bass boost:
Gain ......................................0dBto+12dB
En
224
Appendix
Appendix