Filter
Top Products
35
En
Other Operations
English
3 Use the 5/∞ buttons to select [COLOR TEMP.],
then press the SET button.
SET
MENU
MENU INPUT1
PICTURE SCREEN SETUP OPTION
ENTER EXIT
:
:
DNR
:
MIDDLE
:
MPEG NR LOW
:
CTI ON
:
PURECINEMA
OFF
:
:
:
SIGNAL FORMAT
COLOR DECODING
RGB
VGA
:
CLAMP POSITION
AUTO
AUTO POWER OFF
DISABLE
:
COLOR TEMP. MIDDLE
4 Use the 2/3 buttons to select the desired color
temperature setting.
SET
SET
EXIT
MENU
MIDDLE
:
COLOR TEMP.
The factory default setting is [MIDDLE]. Each time the
button is pressed, the color temperature setting
changes as shown:
5 Press the SET buttton.
The [COLOR TEMP.] function is set and the screen
returns to that shown in step 4.
6 When finished with the setting, press the MENU
button to return to the normal screen image.
Note
[COLOR TEMP.] settings are supported only for input signal from
a video component. Make settings individually for each input
(INPUT1, INPUT3 to INPUT5), and for each signal type.
Reducing video noise (DNR)
Make this setting if video noise is objectionable.
MENU
2/3
5/∞
SET
1 Press the MENU button to display the menu screen.
MENU INPUT1
PICTURE SCREEN SETUP OPTION
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
PICTURE RESET
:
0
:
0
:
0
:
0
:
0
2 Use the 2/3 buttons to select [SETUP].
:
:
:
DNR
COLOR TEMP.
:
MIDDLE
MIDDLE
:
MPEG NR LOW
:
CTI ON
:
PURECINEMA
OFF
:
:
:
SIGNAL FORMAT
COLOR DECODING
RGB
VGA
:
CLAMP POSITION
AUTO
AUTO POWER OFF DISABLE
SET
MENU
MENU INPUT1
PICTURE SCREEN SETUP OPTION
CHANGE EXIT
3 Use the 5/∞ buttons to select [DNR], then press
the SET button.
MENU INPUT1
PICTURE SCREEN SETUP OPTION
:
COLOR TEMP.
:
MIDDLE
:
MPEG NR LOW
:
CTI ON
:
PURECINEMA
OFF
:
:
:
SIGNAL FORMAT
COLOR DECODING
RGB
VGA
:
CLAMP POSITION
AUTO
AUTO POWER OFF DISABLE
:
:
DNR MIDDLE
MENU
5/∞
SET
2/3
3 MIDDLE 2
3 MID LOW 2 3 LOW 2
3 MID HIGH 2 3 HIGH 2
Display operating panel
Remote control unit
Other Operations