Pioneer PDA-5003 Computer Hardware User Manual


 
36
En
Other Operations
English
Reducing noise in MPEG images
(MPEG NR)
Set this function if digital broadcasts, DVD and other
MPEG images are distorted with so-called mosquito
noise.
MENU
2/3
5/
SET
MENU
5/
SET
2/3
Display operating panel Remote control unit
4 Use the 2/3 buttons to select the desired [DNR]
setting.
SET
SET
EXIT
MENU
MIDDLE
:
DNR
The factory default setting is [MIDDLE]. Each time the
button is pressed, the digital noise reduction setting
changes as shown:
÷ The noise reduction effect increases in order LOW
= MIDDLE = HIGH
5 Press the SET buttton.
The [DNR] function is set and the screen returns to
that shown in step 4.
6 When finished with the setting, press the MENU
button to return to the normal screen image.
Note
[DNR] settings are supported only for input signal from a video
component. Make settings individually for each input (INPUT1,
INPUT3 to INPUT5), and for each signal type.
3 OFF 2
3 HIGH 2 3 MIDDLE 2 3 LOW 2
1 Press the MENU button to display the menu screen.
MENU INPUT3
SCREEN SETUP OPTION
ENTER
SET
EXIT
MENU
PICTURE RESET
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
:
0
:
0
:
0
:
0
:
0
PICTURE
2 Use the 2/3 buttons to select [SETUP].
SET
MENU
:
:
DNR
COLOR TEMP.
:
MIDDLE
MIDDLE
:
:
COLOR SYSTEM
PURECINEMA
OFF
AUTO
:
:
CTI
ON
MPEG NR
LOW
AUTO POWER OFF DISABLE
MENU INPUT3
PICTURE SCREEN SETUP OPTION
CHANGE EXIT
3 Use the 5/ buttons to select [MPEG NR], then
press the SET button.
MENU INPUT3
PICTURE SCREEN SETUP OPTION
:
:
DNR
COLOR TEMP.
:
MIDDLE
MIDDLE
:
:
COLOR SYSTEM
PURECINEMA
OFF
AUTO
:
:
CTI ON
MPEG NR
LOW
AUTO POWER OFF DISABLE
4 Use the 2/3 buttons to select the desired [MPEG
NR] setting.
SET
SET
EXIT
MENU
LOW
:
MPEG NR
The factory default setting is [LOW]. Each time the button
is pressed, the noise reduction setting changes as shown:
÷ The noise reduction effect increases in order LOW
= MIDDLE = HIGH
5 Press the SET button.
The [MPEG NR] function is set and the screen returns
to that shown in step 4.
6 When finished with the setting, press the MENU
button to return to the normal screen image.
Note
[MPEG NR] settings are supported only for input signal from a
video component. Make settings individually for each input
(INPUT1, INPUT3 to INPUT5), and for each signal type.
3 OFF 2
3 HIGH 2 3 MIDDLE 2 3 LOW 2
Other Operations