Filter
Top Products
121
APPENDIX (MVP manual)
To Set the Output to the NTSC Mode [NT command]
To Set the Output to Standard RGB Mode [NTR command]
To Set the Output to the Double-speed RGB Mode [NTD command]
Input : NT , NTR , NTD
Explanation : • NT : Sets the NTSC input mode.
H : 15.734 kHz
V : 59.94 Hz
Composite video, Y/C output
• NTR : Sets the standard speed RGB mode.
H : 15.734 kHz
V : 59.94 Hz
• NTD : Sets the double-speed RGB mode.
H : 31.469 kHz
V : 59.94 Hz
• This command is executed in the remote mode.
It is ignored in the manual mode. (Refer to the RMT command.)
(Note)
This multi projection unit can be inputted at normal speed.
Optional RGB Board Adjustment Mode Setting [:A command]
Input : :A
Explanation : • Used to adjust the optional RGB board (RMD-V3020).
• To end the adjustment mode, omit the parameter and input :
.
• For details of adjustments, refer to “RMD-V3020 Command Reference” on the following pages.