Filter
Top Products
21
INSTALLATION AND ASSEMBLY
(13) Cables Used
Use a coaxial cable for the external input cable. Normally use a 3C-2V for less than 15m long. Use 5C-2V for
greater lengths. Adjust the length of the cables. The distance between the transmission system and MPJ should
be as short as possible. When the distance is great, consider the thickness of the cable and electrical compensa-
tion carefully.
The limit is as shown when using the cables to connect the transmission final output terminal and the system.
3C-2V: 15m
5C-2V: 30m
To use a longer cable, the VIDEO signal must be corrected.
(14) Semi-outdoor Installation
This system is basically designed for use indoors. When the system is installed in semi-outdoor locations, the
following problems may occur. Take the following measures before using the system.
• Waterproof and rustproof measures
• Temperature difference and humidity difference
• Light on the screen (So that it is not exposed to direct sunlight.)
• Wind containing salt