Filter
Top Products
5-8
Printer Maintenance
Cleaning the
Sensor
With use, a film and/or dust builds up on the eye of the
sensor causing misfeeds of media. Periodically use com-
pressed air to blow dust from the sensors. For caked on
dust use a Q-tip to remove the dust from the eye of the
sensor.
NOTE: The lower half of the sensor is seen through the
holes in the floor.
Upper
sensor
Lower
sensor
SV61183 Book.indb 5-8SV61183 Book.indb 5-8 6/9/2004 9:16:57 AM6/9/2004 9:16:57 AM