Filter
Top Products
A-28
Printer Menus
Using the
Service Menu
To access the Service Menu, the printer must be OFF
LINE. If the printer is ON LINE, press the On Line button
once so the indicator above the button turns off. Then,
press and hold the Menu button and – button simultane-
ously to display the ServiceMenu.
The Setup Menu is used by an operator to adjust the
alignment of the print cartridges using the ‘Adjust Print’
function. (The other two functions available—"Test Sys-
tem" and "Test Display"— are primarily intended for use
by a Pitney Bowes Service Representative.)
1. Adjust Print
Use this function to adjust the alignment of the three print
cartridges if ‘stepped’ or misaligned prints are seen.
A. Head 2 up down
B. Head 3 up down
C. Head 5 up down
D. Head 6 up down
Use options A through D to vertically synchronize the
individual Print Cartridges.
Example: Print out an adjust print Test Pattern by
pressing the Test button while in the Adjust Print menu.
The printer will print a Test Pattern like this:
Head 3 is printing too high
SV61183 Book.indb A-28SV61183 Book.indb A-28 6/9/2004 9:17:08 AM6/9/2004 9:17:08 AM