Filter
Top Products
IDL series User Guide
202
5.6.13 STP Port Commands
5.6.13.1 Get stp port
Description:
Use this command to display port specific information for the Spanning Tree
Protocol, for all ports, or for the specified port.
Command Syntax:
get stp port info portid <portid-val>
5.6.13.2 Modify stp port
Description:
Use this command to alter the configuration for the spanning tree protocol.
Command Syntax:
modify stp port info portid <portid-val> [enable|disable] [pcost <pcost-val>]
[priority <priority-val>] [pktpriority <pktpriority-val>]
5.6.13.3 Reset stp port stats
Description:
Use this command to reset the STP port stats for a specific interface.
Command Syntax:
reset stp port stats portid <portid-val>
Parameters:
Name Description
portid <portid-val>
The port number of the port for which this entry contains Spanning
Tree Protocol management information.
Type : Mandatory
Valid values: 1 to 386;
enable|disable
Spanning Tree Protocol to be enabled on the Port or not
Type: Optional
Valid values: enable, disable
pcost <pcost-val>
The contribution of this port to the path cost of paths towards the
spanning tree root, which include this port.
Type : Optional
Valid values: 1 - 65535
priority <priority-val>
The value of the priority field which is contained in the most