Filter
Top Products
IDL series User Guide
296
Max Nom AtpPsd(dB/10) : 125 Rate Adaptation : fixed
Min INP : Inp0
Upstream PSD Mask :
------------------------
[ 0] 0
Output Fields:
FIELD Description
IfName
The ADSL line interface name, whose profile is to be modified or
viewed
Rate Adaptation
Defines what form of transmit rate adaptation is configured on
this modem. Refer to ADSL Forum TR-005 for more information.
Target Snr Margin(dB/10)
Configured Target Signal/Noise Margin. This is the Noise Margin
the modem must achieve with a BER of 10 to the power -7, or
better, to successfully complete initialization.
Max Snr Mgn(dB/10)
Configured Maximum acceptable Signal/Noise Margin. If the
Noise Margin is above this, the modem hould attempt to reduce its
power output to optimize its operation.
GsRsIntCorrectionUp
Sets the correction time for the upstream interleaved buffer. RS
can also be disabled.
Dnshift SnrMargin(dB/10)
Configured Signal/Noise Margin for rate downshift. If the noise
margin falls below this level, the modem should attempt to
decrease its transmit rate. In the case that RADSL mode is not
present, the value will be 0.
Upshift SnrMargin(dB/10)
Configured Signal/Noise Margin for rate upshift. If the noise
margin rises above this level, the modem should attempt to
increase its transmit rate. In thecase that RADSL is not present,
the value will be 0.
Min Upshift Time(sec)
Minimum time that the current margin is above UpshiftSnrMgn
before an upshift occurs. In the case that RADSL is not present,
the value will be 0.
Min Dnshift Time(sec)
Minimum time that the current margin is above UpshiftSnrMgn
before an upshift occurs. In the case that RADSL is not present,
the value will be 0.
Fast Min Tx Rate(bps)
Configured Minimum Transmit rate for 'Fast' channels, in bps.
Also refer to 'adslAtucConfRateChanRatio' for information
regarding RADSL mode and refer to ATU-R transmit rate for
ATU-C receive rates.
Intl Min Tx Rate(bps)
Configured Minimum Transmit rate for 'Interleave' channels, in