Planet Technology IDL-4801 Network Card User Manual


 
IDL series User Guide
622
Valid values: 1 -175
mcastcap ivmcapable
|svmcapable | none
It denotes the Multicast Device Capability. If the device
capability is ivlcapable then svmcapable is not a valid value.
If the device capability is neither ivlcapable nor svmcapable
then the only valid value for this field is none. If the device
capability is ivlcapable or svlcapable then this field can't
have value none. ivmcapable and svmcapable can't be set
together.In case of Stacked Vlan Mode this shall apply to
Virtual Vlans.
Type: Modify Optional
ridcap irdcapable
|srdcapable
RID refers to the Routing Information Database. This
database contains information about the routes in the
system. Each RID identifies a flow and defines route related
information for that flow. The RID defines a flow based on
the VLAN Id. The database can be of 2 types,
IRD( Independent Routing Database) where there are more
than one RIDs in the system and each RID defines separate
routes in context of itself. If VlanId <X> and RID <X> have
been created and the routing database is configured for
IRD, than routes in RID <X> shall define flow for packets
coming on VLAN Id <X>. The other mode for the database
is SRD( Shared Routing Database) where there is a single
RID in the system and all flows map to this RID. This RID
has to be explicitly created and no more than 1 RID can be
created in the system in this mode. Flows for all created
VLANs shall map to this RID for routing.
Type: Modify Optional
maxnumac
<maxnumac-val>
It denotes the maximum number of Access Concentrators
supported.
Type: Modify Optional
Valid values: 1 - 8
maxnumsrcmac
<maxnumsrcmac-val>
It denotes the maximum number of Source MAC addresses
that can be used across the different PPPOE and IPOE
interfaces.
Type: Modify Optional
Valid values: 1 - 8
vlanmode nativemode
|stackedmode
Vlan Mode Type: Modify Optional
svlanprotocolid
<svlanprotocolid-val>
This specifies the ProtocolId value to be used for Stacked
Vlan/Service Vlan/Provider Vlan/Second Vlan tag. It is