Filter
Top Products
IP DSLAM
515
profileid <profileid-val>
DRA profile identifier. This shall be used for this DRA instance
Type: Create -- Mandatory
Modify -- Optional
Valid values: 1 - 4
status disable | client |
server
This field is used to configure the status of DHCP relay agent
per instance. It can be disabled or configured as client port or
server port. If it is configured as client port then it adds option
82 and /or do learning as per configuration. If it is configured as
server port then it removes option 82 and does learning if we
dont get portid from agent circuit id.
Type: Create -- Optional
Modify -- Optional
Default value: disable
op82 disable | AddAlways |
AddIfNotExists
This specifies the action to be performed on Option 82 on
receiving DHCP discovery packets for this instance. If disabled
DRA will not add Option82 tag to the DHCP packets. If
AddAlways is set then Option 82 is always added. If
AddIfNotExists is set then Option 82 is added only if the
received DHCP packet does not contain Option 82.
Type: Create -- Optional
Modify -- Optional
Default value: AddAlways
configsuboption aci |
Portid | None | None
This bitmask is used to indicate which all parameters are
configured for this instance. Parameter bit set in this bitmask
will overwrite the automatically derived values of agent circuit Id
and/or port id by the values configured in this MO.
Type: Create -- Optional
Modify -- Optional
Default value: None
acival <acival-val>
This is use to configure agent circuit id for this instance. If ACI
bit is set in gsvDRAConfigSubOptionthen this parameter will
overwrite the generated Agent Circuit Id
Type: Create -- Optional
Modify -- Optional
Default value: "\0"
raival <raival-val>
This is use to configure remote agent id for this instance. This
parameter uniquely identifies the subscriber on the associated
access loop logical port on the Columbia.
Type: Create -- Optional
Modify -- Optional
Default value: "\0"