Filter
Top Products
IDL series User Guide
686
Parameters:
Name Description
src <src-filename>
This specifies the name of the configuration file on the system. The files that can be
uploaded are: /nvram/system/primcfg - The primary configuration file created on the
system after commit operation has been performed once.
/nvram/system/seccfg - The secondary configuration file created on the system after
commit operation has been performed twice.
Type: Mandatory
Valid values: String of up to 128 characters (all characters except ';', ' ', '?')
dest <dest-filename>
This specifies the name of the configuration file to be uploaded to a remote host. The
filename contains the complete path on the host. The filename extension can be .cfg
or .bin or any other user specified extension. Type: Mandatory
Valid values: String of up to 128 characters (all characters except ';', ' ', '?')
ip <ip-address>
This specifies the IP address of the remote host to which the file is to be uploaded.
Type: Mandatory
Valid values: Any valid IP address
mode tftp | ftp
This specifies the protocol to be used for uploading the file. Currently, only TFTP is
supported.
Type: Optional
Valid values: TFTP
Example:
$ upload src /nvram/system/primcfg dest myconfig.cfg ip 198.168.1.1
Output:
Verbose Mode On
Uploading The Code File. . .
Upload Completed
Verbose Mode Off
Uploading The Code File. . .
Upload Completed
Output Fields:
None
Caution:
Ensure that the TFTP server is running on the remote host.
References:
Commit command