Filter
Top Products
IP DSLAM
401
srcipaddrcmp eq | neq |
lt | leq | gt | geq | any |
inrange | exrange |
ingenlist | notingenlist
Source IP address comparison type.'Ingenlist' means check if
source IP address present in interface classifier generic
list.'Notingenlist' means check if source IP address not
present in interface classifier generic list. 'Ingenlist' and
'Notingenlist' are invalid if the direction of the rule for which
this subrule is being created is 'out'.
Type: Create -- Optional
Modify -- Optional
Default value: any
dstipaddrcmp eq | neq |
lt | leq | gt | geq | any |
inrange | exrange |
ingenlist | notingenlist
Destination IP address comparison type.'Ingenlist' means
check if destination IP address present in interface classifier
generic list.'Notingenlist' means check if destination IP
address not present in interface classifier generic
list.'Ingenlist' and 'Notingenlist' are invalid if the direction of
the rule for which this subrule is being created is 'out'.
Type: Create -- Optional
Modify -- Optional
Default value: any
ipsrcaddrmask
<ipsrcaddrmask-val>
The mask value for source IP address. The mask is applied
over the source IP address before checking against a value.
Type: Create -- Optional
Modify -- Optional
Valid values: 1 - 0xffffffff
Default value: 0xffffffff
ipdstaddrmask
<ipdstaddrmask-val>
The mask value for destination IP address. The mask is
applied over the destination IP address before checking
against a value.
Type: Create -- Optional
Modify -- Optional
Valid values: 1 - 0xffffffff
Default value: 0xffffffff
subruleprio low | high |
asinrule
This specifies the priority of the subrule. Based on this priority
value, the subrule is created in fast or slow memory. In case
priority is specified as 'asinrule', subrule priority will be same
as specified in the rule.
Type: Create -- Optional
Modify -- Optional
Default value: asinrule