Filter
Top Products
IDL series User Guide
322
priority <priority-val>
This parameter specifies the priority to be set in Tagged Ethernet PDUs
sent on Management VLAN over this interface. This field is valid only if
either 'ip' field is non-zero or 'usedhcp' field is true. In Native-VLAN
mode, this priority shall be used for C-Vlan tag, while in stacked-VLAN
mode it shall be used for S-Vlan tag.
Type: Create - optional
Modify - optional
Valid values: 0 -7
trfclassprofileid
This parameter specifies the traffic class profile identifier to be
associated with the Ethernet interface.
Type: Optional
Valid values:1 to 10
Default Value: 1
Ctlpktinstid
This specifies the control packet instance identifier associated with this
interface. If the user does not provide any instance identifier while
creating an interface, an instance is created internally from the default
profile governed by the macro 2 and associated to the interface. This will
reduce the total number to instances that can be now created by one.
The default instance is governed by the macro 0.
TYPE: Create -- Optional
Valid Values:1 - 26
Default Value: 0
ctlpktgroupid
<ctlpktgroupid-val> |
none
This parameter specifies the Control packet instance group associated
with this Ethernet interface. The flows for this interface shall be mapped
to control packet instances as mapped for the flows corresponding to the
groupid configured in ctlpkt group info command. If this group does not
have entries for all of the flows, then those flows shall be mapped to the
ctlpktinstid. If groupid is 0, then all the flows shall be mapped to
ctlpktinstid.
Type: Create -- Optional
Valid values: 0 -50
Default value: 0