Filter
Top Products
IP DSLAM
455
applicable.
McastVlan CTag
This parameter specifies the Multicast CVlanId to be used. Two
special values of this parameter are supported in stacked mode:
One value (4097) to signify that repot/leave shall be forwarded to
querier with the C tag with which it was received from the
subscriber port and the S tag specified in multicast Vlan's
definition One value (0) to signify that report/leave shall be
forwarded to querier with S tag specified in multicast Vlan's
definition and no C tag. Other Value shall signify that,
report/leave shall be forwarded to querier with S and C tag
specified in multicast Vlan's definition.
PortList
This parameter specifies the list of ports on which a given
combination of (Group Address, Source Address, VlanId) maps
to a specified multicast vlan (STag, CTag)
5.14.3 Igmpsnoop port info Commands
5.14.3.1 Get igmpsnoop port info
Description:
Use this command to get.
Command Syntax:
get igmpsnoop port info [portid <portid-val >]
5.14.3.2 Modify igmpsnoop port info
Description:
Use this command to modify.
Command Syntax:
modify igmpsnoop port info portid portid [ status Enable | Disable ]
[ leavemode Normal | Fast | FastNormal ] [ pktpriority <pktpriority-val> | none ]
[ maxgrpallowed <maxgrpallowed-val> ] [ querierstatus Enable | Disable ]
[ mcastvlanstatus Enable | Disable ] [ nomatchaction Drop |
Transparentlyforward | Learn ]