Filter
Top Products
IDL series User Guide
388
queue. If the RuleAction is 'retagprio' then this value is priority
which is to be tagged into the outgoing packet and it is also used
along with egress port traffic class mapping table, to determine the
output queue. This field can be modified only if 'status' has the
value 'disable'.
Admin status
Admin status of the rule
Stats admin status
Admin status of rule statistics. Statitics of a rule are collected only
when this field is set to 'enable'. This field can be modified only if
'status' has the value 'disable'. NOTE - Statistics may not reflect
correctly the number of egress mcast, bcast and unknown unicast
packets hitting the rule.
Rule Priority
Tells the priority of the rule. Based on this priority value, the rule
is created in fast or slow memory. This field can be modified only if
'status' has the value 'disable'. This field is ignored if the
'ruleAction' has value 'clfrdef'
Rule Direction
Specifies whether the rule will be applied on incoming interfaces
(ingress)or outgoing interfaces(egress).
ApplyWhenReq
This specifies whether this rule is to be applied only when
required. Rule description field is mandatory if this field is set to
value 'enable'. This field can be modified only if 'status' has the
value 'disable'. This field is ignored if the 'ruleAction' has value
'clfrdef'.
Pkt Type
This field specifies the types of packets on which this rule is to be
applied. 'Mcast' means this rule is valid for multicast packets,
'Bcast' means this rule is valid for broadcast packets and 'Ucast'
means this rule is valid for unicast packets. This field is valid only if
'ruleDir' is 'out'. This field can be modified only if 'status' has the
value 'disable'.
Application
Description
Description of the application that receives packets matching this
rule. This field is valid and mandatory only if RuleAction is
'sendtocontrol' or RuleApplyWhenReq is 'enable'. This field can be
modified only if 'status' has the value 'disable'
Snoop Level
Snoop level specifies whether packet will be snooped directly from
Interface or from Bridge after applying Bridging functionality .If
none of the Rule actions is 'sendtoControl' or 'copytocontrol', then
this field has no significance. This field can be modified only if
'status' has the value 'disable'.
Expression Id
Identifies the expression id from the Generic Filter Expression
Table to be used. This field is used only if 'ruleAction' is 'exprdef'.
In absence of this field, the default relationship between all