Filter
Top Products
IDL series User Guide
378
between IPOE-0 and IPOE-191 or between PPPOE-0 and
PPPOE-191.
Type: Create -- Mandatory
Delete -- Mandatory
Get -- Optional
listid <listid-val>
This field stores the list identifier value. A row indexed by this id
must exist in Generic Filter Named List Table. Value type of the
list should match subrule field for which comparsion type is
ingenlist or notingenlist incase the rule containing the subrule is
attached on the same interface. It should be 'U32' in case a rule
containing IP subrule or Generic subrule with cmptype as
ingenlist or notingenlist is attached on same interface. The list
type can either discrete or range.
Type: Create -- Mandatory
Valid values: 1 - 65535
Example:
$ create filter namedlist map ifname eoa-1 listid 2
Output:
Verbose Mode On
Entry Created
IfName : eoa-1
ListId : 2
Verbose Mode Off:
Entry Created
Output field:
Field Description
IfName
This specifies the eoa, pppoe, ipoe or ethernet interface to which named generic list is
attached. Valid values for the field are between EOA-0 and EOA-23 or between eth-0
and eth-1or between IPOE-0 and IPOE-191 or between PPPOE-0 and PPPOE-191.
ListId
This field stores the list identifier value. A row indexed by this id must exist in Generic
Filter Named List Table. Value type of the list should match subrule field for which
comparsion type is ingenlist or notingenlist incase the rule containing the subrule is
attached on the same interface. It should be 'U32' in case a rule containing IP subrule
or Generic subrule with cmptype as ingenlist or notingenlist is attached on same
interface. The list type can either discrete or range.