Filter
Top Products
User’s Guide for the Polycom RealPresence Group Series and the Polycom Touch Control
Polycom, Inc. 9
To view your system details:
1 On the Home screen, touch System and then .
The following Touch Control information is displayed:
Model
Hardware Version
Serial Number
Panel Software
Operating System Version
Kernel Version
MAC Address
IP Address
2 To view a paired Group system’s details, touch the RealPresence Group Series System tab.
Adjusting Touch Control Brightness
You can adjust the brightness of the Polycom Touch Control screen.
To adjust the Polycom Touch Control display brightness:
1 From the Home screen, touch .
2 Select the Touch Control tab if it is visible.
3 Use the slider under Display to adjust the display’s brightness.
Selecting and Adjusting a Camera or Other Video Source
You can use the Polycom Touch Control to select and adjust the main camera or other near-end or far-end
video sources, such as document cameras or computers. You might be able to adjust other auxiliary
cameras or far-end cameras that support pan, tilt, and zoom movement.
When you are in camera control mode, you can press and hold a number to save a preset. For more
information about presets, see Setting and Using Camera Presets on page 11.
To select a near-end or far-end camera, or other video source:
1 From the Call screen or from the Home screen, touch Cameras.
2 Touch Select Camera, and then touch the camera or other video source you want to use.
3 In a call, touch Near or Far to select either near-end or far-end control.
4 The icon for the video source moves up slightly on the screen, and the video source is shown to the
call participants.
To adjust a Polycom EagleEye III, Polycom EagleEye IV, Polycom EagleEye Acoustic, or
Polycom EagleEye Director using the Polycom Touch Control:
1 Select either a near-end or far-end video source to control. During a multipoint call being hosted by
a system in the call, you can only adjust a camera at the far end that has a current speaker.