Filter
Top Products
User’s Guide for the Polycom RealPresence Group Series and the Polycom Touch Control
Polycom, Inc. 11
To disable EagleEye Director tracking in a call:
» On the Polycom Touch Control Home or Call screen, touch Cameras and select Stop Camera
Tracking.
To enable EagleEye Director tracking in a call:
» On the Polycom Touch Control Home or Call screen, touch Cameras and select Start Camera
Tracking.
Setting and Using Camera Presets
Camera presets are stored camera positions that you can create ahead of time or during a call.
Presets allow you to:
● Quickly point a camera at pre-defined locations in a room.
● Select a video source such as a document camera or an auxiliary camera.
If your system’s camera supports pan, tilt, and zoom movement, you can create up to 10 preset camera
positions for the near-end camera. Each preset stores the following information:
● Camera number
● Camera zoom level
● Direction the camera points
These presets remain in effect until you change them.
If far-end camera control is allowed, you can create 10 presets for the far-end camera. These presets are
saved only for the duration of the call. You might also be able to use presets that were created at the far end
to control the far-end camera.
To view presets or move the camera to a stored preset:
1 From the Home screen or Call screen, touch Cameras.
2 If you are in a call, touch Near or Far to select either near-end or far-end control.
3 Touch View Presets.
Icons for presets 0-9 are shown on the screen. Solid preset icons indicate stored camera positions.
Transparent icons indicate unassigned presets.
4 Touch a number to go to a saved preset.
To store a preset:
1 From the Home screen or Call screen, touch Cameras.
2 If you are in a call, touch Near or Far to choose a near-end or far-end camera.
Points to note about camera control and layouts:
• When in a call, selecting near camera control pans and zooms the local camera without changing
the layout.
• When out of a call, selecting camera control changes the Self View to full screen.
• Incoming calls override the full-screen Self View layout.