Filter
Top Products
Chapter 2 Operation
58
For example, a bar code 1 inch in height can scan successfully at a
printer speed of 25 inches per second; a bar code 1/8 inch in height
can scan successfully at no more than 3 inches per second.
By changing the Min. Code Height, the printer and slew speeds will
be changed automatically.
To change the Min. Code Height:
1. Press to take the printer offline and place the printer in
Menu mode.
2. If necessary, press ↓ and ↵ atthesametimetounlockthe
↵ key.
3. If necessary, press until “VALIDATOR” displays.
4. Press ↓ until “Min. Code Height” displays.
5. Press + or – to scroll through the choices: 0.13 to 1.00 inches in
0.01 inch increments. The default is 0.25 inches.
6. Press ↵ to select the desired value. The printing and slew
speeds will be changed after ↵ is pressed.
7. Press ↓ and ↵ at the same time to lock the ↵ key, then press
PAUSE to take the printer offline.
8. Press PAUSE again to put the printer online.
To set the printer speed manually:
1. Press to take the printer offline and place the printer in
Menu mode.
2. If necessary, press ↓ and ↵ atthesametimetounlockthe
↵ key.
3. Press until “MEDIA CONTROL” displays.
4. Press ↓ until “Print Speed” displays.
5. Press + or – to scroll through the choices.
6. Press ↵ to select the desired value.
7. Press ↓ and ↵ at the same time to lock the ↵ key, then press
PAUSE to take the printer offline.
8. Press PAUSE again to put the printer online.
.
.
.
.
.
.
.
.
.
.
.
.