Filter
Top Products
Chapter 7: Configuring Communications
NETBOOK PRO Bluetooth Settings
102
Psion Teklogix NETBOOK PRO User Manual
The Connection list table shows the Name, Address, and Type of the currently
active connections. The table is periodically updated while on display, but it could
take a few seconds before it reflects the actual list of connections. The Type column
of the table shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections
for scanning as well as the service connections.
Note: You can change the device-name and description of your radio by clicking
on the System icon in Control Panel, which will open the System Proper-
ties page. Click on the Device Name tab to access the menu and change
your settings. Then click on OK.
Although the name will have changed in the Property menu in Bluetooth
Controls, the radio only reads it on boot-up. Therefore, for the changes to
take effect, you must reset the NETBOOK PRO (see “Resetting The NET-
BOOK PRO” on page 32).