Q-Logic 59047-10 D Switch User Manual


 
4–Fibre Alliance MIB Objects
connUnitNumSensors (1.3.6.1.3.94.1.6.1.14)
4-12 59047-10 D
connUnitNumSensors (1.3.6.1.3.94.1.6.1.14)
Number of sensors in the connUnitSensorTable elements. If this value is not
applicable, return unknown.
Syntax INTEGER
Access read-only
Status mandatory
Return Value Returns the number of sensors listed in the connUnitSensorTable. QLogic
5200 = 3, QLogic 5202 = 6, QLogic 5600 = 3, QLogic 5602 = 6, QLogic 9000
Series is dependent on number of blades installed
connUnitStatusChangeTime (1.3.6.1.3.94.1.6.1.15)
The sysUpTime timestamp, in centiseconds, at which the last status change
occurred.
Syntax TimeTicks
Access read-only
Status obsolete
Return Value This object is obsolete. Always returns error status "NoSuchName".
connUnitConfigurationChangeTime (1.3.6.1.3.94.1.6.1.16)
The sysUpTime timestamp, in centiseconds, at which the last configuration
change occurred.
Syntax TimeTicks
Access read-only
Status obsolete
Return Value This object is obsolete. Always returns error status "NoSuchName".