Filter
Top Products
4–Fibre Alliance MIB Objects
connUnitPortControl (1.3.6.1.3.94.1.10.1.16)
4-38 59047-10 D
connUnitPortControl (1.3.6.1.3.94.1.10.1.16)
This object is used to control the addressed connUnit's port.
resetConnUnitPort: If the addressed connUnit allows this operation to be
performed to this port, the addressed port performs a vendor-specific ”reset”
operation. Examples of these operations are: the Link Reset protocol, the
Loop Initialization protocol, or a re-synchronization occurring between the
transceiver in the addressed port to the transceiver that the port is
connected to.
bypassConnUnitPort: If the addressed connUnit allows this operation to be
performed to this port, the addressed port performs a vendor-specific
“bypass” operation. Examples of these operations are transitioning from
online to offline, a request (non-participating) command to the Loop Port
state machine, or removal of the port from an arbitrated loop by a hub.
unbypassConnUnitPort: If the addressed connUnit allows this operation to
be performed to this port, the addressed port performs a vendor-specific
“unbypass” operation. Examples of these operations are the Link Failure
protocol, a request (participating) command to the Loop Port state machine,
or addition of the port to an arbitrated loop by a hub.
offlineConnUnitPort: If the addressed connUnit allows this operation to be
performed to this port, the addressed port performs a vendor-specific
“offline” operation. Examples of these operations are disabling a port's
transceiver, the Link Failure protocol, request (non-participating) command
to the Loop Port state machine, or removal of the port from an arbitrated
loop by a hub.
onlineConnUnitPort: If the addressed connUnit allows this operation to be
performed to this port, the addressed port performs a vendor-specific
“online” operation. Examples of these operations are enabling a port's
transceiver, the Link Failure protocol, request (participating) command to the
Loop Port state machine, or addition of the port from an arbitrated loop by a
hub.
resetConnUnitPortCounters: If the addressed connUnit allows this
operation to be performed to this port, the addressed port statistics table
counters will be set to zero.