Filter
Top Products
4–Fibre Alliance MIB Objects
Port Statistics Table
4-62 59047-10 D
Port Statistics Table
The objects described in this section are in a table format indexed by World Wide
Name and Index. The index represents the port number to interrogate. An
example of how to access one of these objects given a WWN of
100000c0dd0090a7 is:
"snmpget localhost public
fcmgmt.statSet.connUnitPortStatTable.connUnitPortStatEntry.connUni
tPortStatUnitId.16.0.0.192.221.0.144.167.0.0.0.0.0.0.0.0.1".
There is one and only one statistics table for each individual port. For all objects in
statistics table, if the object is not supported by the conn unit then the high order
bit is set to 1 with all other bits set to zero. The high order bit is reserved to
indicate if the object if supported or not. All objects start at a value of zero at
hardware initialization and continue incrementing until end of 63 bits and then
wrap to zero.
connUnitPortStatUnitId (1.3.6.1.3.94.4.5.1.1)
A unique value among all entries in this table having the same
connUnitPortStatUnitId, between 1 and connUnitNumPort
[connUnitPortStatUnitId].
Syntax FcGlobalId
Access read-only
Status mandatory
Return Value Returns the World Wide Name of the switch followed by 8 bytes of zeros.
For example: 10 00 00 C0 DD 00 71 C9 00 00 00 00 00 00 00 00.
connUnitPortStatIndex (1.3.6.1.3.94.4.5.1.2)
A unique value among all entries in this table, between 0 and
connUnitNumPort[connUnitPortUnitId].
Syntax INTEGER (0..2147483647)
Access read-only
Status mandatory
Return Value The port table index.