Filter
Top Products
3–MIB-II Objects
snmpOutTraps (1.3.6.1.2.1.11.29)
59047-10 D 3-61
snmpOutTraps (1.3.6.1.2.1.11.29)
The total number of SNMP Trap PDUs generated by the SNMP protocol entity.
Syntax Counter
Access read-only
Status mandatory
snmpEnableAuthenTraps (1.3.6.1.2.1.11.30)
Indicates whether the SNMP agent process is permitted to generate
authentication-failure traps. The value of this object overrides any configuration
information; as such, it provides a means whereby all authentication-failure traps
may be disabled.
It is strongly recommended that this object be stored in non-volatile memory so
that it remains constant between re-initializations of the network management
system.
Syntax INTEGER { enabled(1), disabled(2) }
Access read-write
Status mandatory
Return Value Read returns enabled (1) if AuthFailureTrap = True, otherwise disabled (2).
Writes not supported.
The ifXTable
ifName (1.3.6.1.2.1.31.1.1.1.1)
The textual name of the interface. The value of this object should be the name of
the interface as assigned by the local device. If there is no local name, or this
object is otherwise not applicable, then this object contains a zero-length string.
Syntax DisplayString
Access read-only
Status current