Q-Logic 59047-10 D Switch User Manual


 
2–Configuring a Switch
Configuring a Switch Using the Command Line Interface
2-4 59047-10 D
2=emergency 7=notify
3=alert 8=info
4=critical 9=debug
5=error 10=mark :
Trap1Version (1 / 2) :
Trap1Community (string, max=32 chars) :
SNMP Trap 2 Configuration - may optionally use 'set setup snmp trap 2'
command.
Current Values:
Trap2Enabled False
Trap2Address 10.20.43.231
Trap2Port 162
Trap2Severity info
Trap2Version 2
Trap2Community public
New Value (press ENTER to not specify value, 'q' to quit):
Trap2Enabled (True / False) :
Trap2Address (hostname, IPv4, or IPv6 Address) :
Trap2Port (decimal value, 1-65535) :
Trap2Severity (select a severity level)
1=unknown 6=warning
2=emergency 7=notify
3=alert 8=info
4=critical 9=debug
5=error 10=mark :
Trap2Version (1 / 2) :
Trap2Community (string, max=32 chars) :
SNMP Trap 3 Configuration - may optionally use 'set setup snmp trap 3'
command.
Current Values:
Trap3Enabled False
Trap3Address 10.20.33.231
Trap3Port 162
Trap3Severity warning
Trap3Version 2
Trap3Community public
New Value (press ENTER to not specify value, 'q' to quit):
Trap3Enabled (True / False) :
Trap3Address (hostname, IPv4, or IPv6 Address) :
Trap3Port (decimal value, 1-65535) :
Trap3Severity (select a severity level)
1=unknown 6=warning
2=emergency 7=notify